EXTERIORSPAINTS4SEASONS ELASTIC - Kraft Paints

Elastomeric waterproofing paint for exterior walls

High-quality elastomeric waterproofing acrylic paint for exterior use. It covers completely all existing hairlines and small cracks and prevents their recurrence thanks to its superior elasticity even in extreme temperatures. It creates a highly resistant elastic membrane, which insulates and protects from the rain and humidity. It waterproofs the surface offering at the same time water-vapour permeability, which prevents the build-up of moisture and mold. The white is certified as cool paint presenting high solar reflectance (SR), high infrared emittance (ε) and high solar reflectance index (SRI) reducing significantly the temperature of the walls during summer. The countless of vibrant shades are highly resistant to solar radiation, weather conditions and air-pollution, which makes the surface remain protected, and clean longer. It presents easy flow, high coverage, as well as strong adhesion to mineral walls (plaster, cement, brick, etc.) and a high film-building for an elegant matt finish on the wall.

» Superior elasticity
» 
Waterproofing from humidity
» 
Long-lasting vibrant colors

Araiosi_01

Thinning
5-10%

Araiosi_01

Coverage
11-13m2/L

Araiosi_01

Tools
brush, roller, airless, spray gun

Araiosi_01

Dry to touch
1-2 hours

Packaging

10 L, 3 L

Shades

Bases P/T/D/A, White



  • Instructions
  • STORAGE

Instructions

SURFACE PREPARATION
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. Wet sanding is recommended for the surface preparation.
» On new surfaces: before applying the topcoat, apply one coat of a primer such as KRAFT ECO DUR AQUA or KRAFT DUR.
» On surfaces that need repairing: use KRAFT SPACHTEL or KRAFT PUTTY or the suitable repairing material of KRAFT.
» Allow new plaster or concrete to surfaces to cure a minimum of 30 days prior to paint application.

APPLICATION INSTRUCTIONS
» Avoid applying in case of expected rain in the next 4 days.
» Before you start painting, dilute the paint by adding 5-10% by volume tap water and stir well.
» Appropriate application tools for this product are brush, roller and airless spray gun.
» The product shall be tinted with KRAFT INSPIRED COLOR tinting system to thousands shades. To ensure product quality it is required to tint the corresponding base selected from the tinting system of KRAFT.
» It is strongly recommended to be tinted with F-shades taken from KRAFT INSPIRED COLLECTION for high weather resistance or with the innovative shades of KRAFT REFLECTIVE COLLECTION for high weather resistance, certified from National Technical University of Athens for their high Total Solar Reflection (TSR%).
» For shade and finish consistency, it is advisable to use containers of the same batch number. In case of different batch number it is recommended that they be mixed in a large container.
» Apply two coats of KRAFT 4 SEASONSTM ELASTIC for the best result.
» Minimum recoat time: 3-4 hours.
» Surface drying time: 1-2 hours at 25°C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Avoid patching after finishing the painting. The difference of the substrate absorbance and application method might cause color or gloss deviations. If it is necessary to repair apply the paint to the whole surface.
» Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.

AFTER USE INSTRUCTIONS
» 
Clean the tools thoroughly with water and soap.
» Close the bucket to maintain in good condition for future use. Store before and after use in a cool place and away from sunlight or frost conditions.

STORAGE

» Store the product at temperatures between 5°C to 35°C.

NEWSLETTER

Μάθετε πρώτοι όλα τα νέα.