Silicone acrylic coating for exterior use
Prevents the accumulation of dust and pollutants and allows the rain to carry them away, keeping the painted surface clean for long periods of time. Due to its superior water repellent properties, it prevents exterior humidity and rainwater from penetrating the substrate, providing long-lasting protection. It also allows any humidity trapped inside the wall to easily escape into the atmosphere, protecting it from blistering, peeling, mold and algae. Available in bright white or an infinite number of hues, it resists time and solar radiation, offering an aesthetic upgrade to any building. Certified as a cool material by the National Technical University of Athens.
- Excellent waterproofing
- High water vapour permeability
- Ideal for places with high humidity

Thinning
0-5%

Tools
Roller, brush, airless, spray-gun

Coverage
8-10m2/L

Dry to touch
1-2 hours
Packaging | 10 L, 3 L |
---|---|
Shades | Bases P/T/D, White |
Instructions
Surface Preparation
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc.
Application Instructions
Before you start painting, dilute the paint by adding up to 5% by volume tap water and stir well.
The product shall be tinted with KrAFT INSPIrED COLOr tinting system to thousands shades. To ensure product
Quality it is required to tint the corresponding base selected from the tinting system of KrAFT.
It is strongly recommended to be tinted with F-shades taken from KrAFT INSPIrED COLLECTION for high weather resistance or with the innovative shades of KrAFT
rEFLECTIVE COLLECTION for high weather resistance, certified from National Technical University of Athens for their high Total Solar reflection (TSr%).
For shade and finish consistency, it is advisable to use containers of the same batch number. In case of different batch number it is recommended that they be mixed in a large container.
Apply two coats of KrAFT 4 SEASONS TM for the best result.
Minimum recoat time: 3-4 hours.
Surface drying time: 1-2 hours at 25°C and 50% relative humidity (drying times are longer in wet/cold conditions).
Avoid patching after finishing the painting. The difference of the substrate absorbance and application method might cause colour or gloss deviations. If it is necessary to repair apply the paint to the whole surface.
Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.
After Use Instructions
Recover unused paint for reuse
Reuse of paint can effectively minimize the product’s life cycle environmental impact.
Clean the tools thoroughly with water and soap.
Close the bucket to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
Allow at least 15 days before cleaning and washing newly painted surfaces. Dark shades are less resistant to frequent washing.
You can wash the painted surfaces gently with a soft sponge and water and in cases of bad stains with a mild detergent
read label before use. For further information please refer to the Material Safety Data Sheet.