INTERIORSPAINTSAsepsis - Kraft Paints

High-quality antifungal emulsion paint

High quality waterborne emulsion paint with antifungal properties for indoor use, based on acrylic binder. It is applied on new or already painted surfaces such as walls, gypsumboards, cement boards, plasters, offering a superior satin finish. Due to its high wet scrub resistance against the usual cleaning agents and its resistant against disinfentant solutions, it is highly recommended for use in aseptic spaces such as hospitals. Also, due to the special biocidal substances that contains, it prevents the growth of fungi on its surface making it ideal for use in the food industry and in other high humidity spaces.

» Prevents the growth of fungi on its film
» 
Superior satin finish
» 
High wet scrub resistance

Araiosi_01

Thinning
8-12%

Araiosi_01

Coverage
12-15m2/L

Araiosi_01

Tools
Brush, roller, spray-gun

Araiosi_01

Dry to touch
1-2 ώρες

Packaging

10 L, 3 L

Shades

White



  • Instructions
  • STORAGE

Instructions

SURFACE PREPARATION
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. Wet sanding is recommended for surface preparation.
» On new surfaces: before applying the topcoat, apply one coat of a water-based primer such as KRAFT ECO DUR AQUA or KRAFT DUR AQUA WHITE or KRAFT HAFT.
» On surfaces that need repairing: use KRAFT SPACHTEL or KRAFT PUTTY or the suitable repairing material of KRAFT.
» On surfaces with stain and mold problems: clean the surface with KRAFT MOLD BLOCKER and then use the insulating undercoat KRAFT ECO STAIN BLOCKER AQUA.

APPLICATION INSTRUCTIONS
» Before you start painting, dilute the paint by adding 8-12% by volume tap water and stir well.
» Appropriate application tools for this product are brush, roller or airless spray gun.
» The product shall be tinted with KRAFT INSPIRED COLOR tinting system to thousands light shades.
» For shade and finish consistency, it is advisable to use containers of the same batch number.
» In case of different batch number it is recommended that they be mixed in a large container.
» KRAFT ASEPSIS can be mixed with KRAFT MASTER BASICS for plenty of light shades.
» Apply 2 coats of KRAFT ASEPSIS for the best result.
» Surface drying time: 1-2 hours at 25°C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Minimum recoat time: 4-6 hours.
» Do not apply at temperatures below 10°C and above 35°C and above 65% relative humidity.
» Avoid patching after finishing the painting. The difference of the substrate absorbance and application method might cause color or gloss deviations. If it is necessary to repair apply the paint to the whole surface.

AFTER USE INSTRUCTIONS
» Clean the tools thoroughly with water and detergent.
» Close the bucket to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
» Allow at least 15 days before cleaning and washing newly painted surfaces.
» You can wash the painted surfaces gently with a soft sponge and water or with disinfectant solutions and in cases of bad stains with a mild detergent.

STORAGE

» Store the product before and after opening at temperatures between 5°C to 35°C.

NEWSLETTER

Μάθετε πρώτοι όλα τα νέα.