Acrylic solvent-based masonry paint
High-quality solvent-borne acrylic masonry paint for outdoor use. It is applied on new or already painted cementitious vertical or horizontal surfaces, mortars, renders etc. It is extremely highly resistant to atmospheric pollutants and extreme weather conditions. It performs excellent alkali and water resistance, protecting the cement reinforcement against corrosion. It is suitable for walls, cementitious floors, courtyards, pavements, garage floors, warehouses etc. It is strongly recommended for mountainous places or nearby the sea.
» Direct to cementitious substrates
» Pollution repellent properties
» Protects the concrete reinforcement
brush, roller or spray-gun
Dry to touch
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. In case of rusty surfaces, sand and remove residues.
» On new cementitious surfaces: Apply 1 coat of KRAFT DUR (optionally). After 24 hours apply the topcoat.
» On painted/stable surfaces: Apply two coats of KRAFT BETONYL.
» Allow new plaster or concrete surfaces to cure a minimum of 30 days prior to paint application.
» Before start painting, dilute the paint by adding up to 5% by volume KRAFT BRUSH THINNER.
» Appropriate application tools for this product are brush roller or spray-gun.
» Apply 2 coats of KRAFT BETONYL for the best result.
» Apply it outdoor or in a well-ventilated area.
» Minimum recoat time is 8-10 hours.
» The surface drying time is 1-2 hours at 25°C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.
AFTER USE INSTRUCTIONS
» Clean the tools thoroughly with KRAFT BRUSH THINNER, water and soap.
» Close the bucket well to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
» Store the product before and after opening at temperatures between 5°C to 35°C.