Energy efficient coating for anti-cracking and thermal protection of walls

A waterborne polycarbonate polymer modified acrylic coating with resistance to substrate alkali migration, excellent adhesion to prepainted cementitious substrates without the need for additional primers. The tough coating benefits from a combination of patented energy saving and solar energy reflecting ingredients, a unique binder system reinforced with a highly durable polycarbonate polymer that enhances water resistance, improves water vapour permeability and permits an easy to clean fine textured surface. The product may be tinted and presents exceptional color fastness, exterior durability and UV resistance. Superior resistance to bacteria, fungi and algae is a further benefit with CLIMACOMFORT STUCCO. It has excellent solar reflection and unique thermal insulating ingredients that store heat energy and manage the temperature thus reducing the passage of heat into and out of the building and contributing to an improved indoor climate, more comfortable living conditions and better energy efficiency.

Araiosi_01

Thinning
0-5%

Araiosi_01

Coverage
1.0-2.2m²/L

Araiosi_01

Tools
trowel, airless or air-assisted spraygun

Araiosi_01

Dry to touch
3-4 hours

Packaging

15 L, 3 L

Shades

Transparent, White



  • Instructions
  • STORAGE

Instructions

SURFACE PREPARATION AND APPLICATION

To ensure proper adhesion and adequate substrate penetration, the surface must be dry, clean and free of dust, oil, salt, rust, loose paint and residues, blistered paint etc. Remove all moss, fungi and algae by mechanical abrasion and wash with soapy water and allow the substrate to dry. Use KRAFT PUTTY or other suitable repairing material of KRAFT to fill gaps, cracks and other damaged surfaces.
» It is recommended that fresh concrete, stucco, plaster and gypsum surfaces are allowed to dry for at least 4 weeks before the application of the CLIMA COMFORT STUCCO.
» On porous, new surfaces or already painted substrates and on STRONG BOND in CLIMATotal® System apply one coat of PLASTER PRIMER.
» After 24 hours apply one coat of CLIMA COMFORT STUCCO by a metal trowel and as long as the film is still wet immerse the reinforcement mesh in it. Apply the second coat after 6-12 hours by a metal trowel and smoothen.

APPLICATION INSTRUCTIONS
» 
Tools: Trowel, airless or air-assisted spray gun.
» Thinning:
1st coat: If required, dilute with a maximum of 5% clean water.
2nd coat: As per first coat.
Dry to Touch: 3-4 hours at 25ºC and RH 50% relative humidity (drying times are longer at lower temperatures and at higher relative humidity).
Dry to Recoat: 12-24 hours under favourable drying conditions. Stir well with a flat paddle, before application and at regular intervals during application.
» Stir well with a flat paddle, before application and at regular intervals during application.
» Do not apply at temperatures below 10ºC or above 35ºC or at humidity levels above 65%.
» Do not apply if rain is imminent.
» Protect the applied area from rain by using waterproof sheet-ing placed so as to avoid contact with the painted surface.

STORAGE

» Store containers at 5ºC to 35ºC.
» Keep containers tightly closed when not in use.

NEWSLETTER

Μάθετε πρώτοι όλα τα νέα.