Acrylic, fiber-reinforced, ready-to-use water-repellent, decorative finishing render in pasty form
ClimaTop® Basic is a decorative, ready-to-use in pasty-form, acrylic fiber-reinforced finishing render. It is vapor permeable and water repellent. It consists of natural granules of suitable graded granulometry, reinforced with PP fibers and additional enhancers. It is classified as finishing render based on organic binder according to the standard ΕΝ 15824 and as part of certified external thermal insulation system CLIMAWALL® by BIOCLIMA® according to EAD 040083-00-0404, as finishing render
» Fiber reinforced.
» High resistance to weather conditions.
» Vapour permeable and water repellent.
» Color stability.
» Excellent dirt pick-up resistance.
» Different decorative textures (depending on the treatment method during application).
» Can be tinted in hundreds of shades through the KRAFT Inspired Colour System.
Dry to touch
- HEALTH, SAFETY & ENVIRONMENTAL INFORMATION
1. SUBSTRATE – PREPARATION:
» To ensure better adhesion, the surface is required to be dry, clean and free of dust, oils, salts, rust, loose paint and residues, swollen paints, etc.
» The surface should be as flat as possible. Large unevenness and cracks must be repaired using suitable repairing products by KRAFT PAINTS, before applying ClimaTop® Basic.
» It is recommended that fresh concrete, stucco, plaster and gypsum surfaces are allowed to dry for at least 4 weeks before applying ClimaTop® Basic.
» Apply a layer of ClimaTop® Primer on porous, new surfaces or already painted substrates, and also on cementitious base coat layer of external thermal insulation system CLIMAWALL® by BIOCLIMA®
» The product does not require addition of mixing water.
» Stir the product before use with a low speed mechanical drill to homogenize.
» After 24 hours of priming, apply a layer of ClimaTop® Basic with a stainless steel spatula and adjust the layer thickness to grain size.
» Shape the decorative texture by properly treatment using a plastic spatula.
4. CLEANING OF TOOLS:
» Immediately after the application the tools must be cleaned with warm water and soap or a detergent solution.
» Remove as much material as possible from tools before cleaning.
» Do not apply at temperatures below 5°C and above 35°C as well as at humidity levels above 65%.
» Do not apply in case of frost forecast for at least next 24 hours after application.
» Do not apply in case of impending rain or in direct intense sunlight and wind currents.
» Surfaces must be protected from the sun, wind and rain with special protective covers.
» Surface drying time 1-2 hours at 25°C and relative humidity 50%.
» Minimum repainting time 24 hours at a temperature of 25°C and relative humidity 50%.
» Complete drying time 14 days at a temperature of 25°C and relative humidity 50%.
» Drying times are prolonged at lower temperatures and higher relative humidity.
» It is recommended to check the adequacy of the amount of material and human resources before the application.
» When application starts on parts of masonry it is recommended to be completed without interruption to avoid creation of joint lines with darker shade.
» In case of cessation of the application, this is recommended to take place at: edges of the wall, near balconies, building joints, architectural elements (eg gutters, architectural details, etc.), so that during the restart of the application the joint lines do not exist at all or be as few as possible.
» Stored in a dry environment with temperature between 5ºC – 35°C, away from direct sunlight and rain, for maximum 24 months from the date of production.
» Keep containers tightly closed when not in use.
HEALTH, SAFETY & ENVIRONMENTAL INFORMATION
Read label before use. For further information please consult the Material Safety Data sheet.
Poison Centre Telephone +30 210 7793 777