Decorative plaster made of natural colored stone for the socle.
ClimaTop® Granite is an acrylic, decorative, ready-to-use finishing render in pasty form, with colored aggregates. Gives a premium final decorative result that simulates the appearance of granite. It is classified as finishing render based on organic binder according to the standard ΕΝ 15824.
» High resistance to weather conditions.
» Excellent elasticity.
» Excellent vapour permeability.
» Excellent mechanical strength.
» Multiple combinations of colored aggregates for an ideal finishing result.
» High dirt-pick up resistance.
Dry to touch
- HEALTH, SAFETY & ENVIRONMENTAL INFORMATION
1. SUBSTRATE – PREPARATION:
» To ensure better adhesion, the surface is required to be dry, clean and free of dust, oils, salts, rust, loose paint and residues, swollen paints, etc. The surface should be as flat as possible.
» Large unevenness and cracks must be repaired using suitable repairing products by KRAFT PAINTS, before applying ClimaTop® Granite.
» It is recommended that fresh concrete, stucco, plaster and gypsum surfaces are allowed to dry for at least 4 weeks before applying ClimaTop® Granite.
» Apply a layer of ClimaTop® Primer on porous, new surfaces or already painted substrates, and also on cementitious surfaces.
» The product does not require addition of mixing water.
» Stir the product before use with a low speed mechanical drill to homogenize.
» After 24 hours of priming, apply a layer of ClimaTop® Granite with a stainless steel spatula from bottom to top and adjust the layer thickness to approximately grain size.
4. CLEANING OF TOOLS:
» Immediately after the application the tools must be cleaned with warm water and soap or a detergent solution.
» Remove as much material as possible from tools before cleaning.
» Do not apply at temperatures below 5°C and above 35°C as well as at humidity levels above 65%.
» Do not apply in case of frost forecast for at least next 24 hours after application.
» Do not apply in case of impending rain or in direct intense sunlight and wind currents.
» Surfaces must be protected from the sun, wind and rain with special protective covers.
» Surface drying time 1-2 hours at 25°C and relative humidity 50%.
» Minimum repainting time 24 hours at a temperature of 25°C and relative humidity 50%.
» Complete drying time 14 days at a temperature of 25°C and relative humidity 50%.
» Drying times are prolonged at lower temperatures and higher relative humidity.
» It is recommended to check the adequacy of the amount of material and human resources before the application.
» When application starts on parts of masonry it is recommended to be completed without interruption in order to avoid creation of joint lines with darker shade.
» In case of cessation of the application, this is recommended to take place at: edges of the wall, near balconies, building joints, architectural elements (eg gutters, architectural details, etc.), so that during the restart of the application the joint lines do not exist at all or be as few as possible.
» Stored in a dry environment with temperature between +5°C and +35°C, away from direct sunlight and rain, for maximum 24 months from the date of production.
» Keep containers tightly closed when not in use.
HEALTH, SAFETY & ENVIRONMENTAL INFORMATION
Read label before use. For further information please consult the Material Safety Data sheet.
Poison Centre Telephone +30 210 7793 777