High adhesion filling wall primer
White waterborne primer based on special binders for indoor and outdoor use. It provides extreme adhesion and filling power on porous wall surfaces eliminating the problem of paint removal after pulling the paper-tape. It is virtually odorless it penetrates effectively and protects the topcoat against alkali attack. Because of its whiteness and its ability to be tinted contributes to topcoats low consumption.
» Low Odour
» Water vapour permebility
» For every mineral substrate
» High adhesion and penetration properties
» High alkali resistance
» Improves the topcoat’s spreading rate.
Brush, roller, spray-gun
Dry to touch
0.75 L, 3 L, 9 L
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc.
» On new or already applied surfaces: apply one coat of KRAFT DUR AQUA WHITE
» On surfaces that need filling: use KRAFT SPACHTEL or KRAFT PUTTY or other suitable repairing material of KRAFT.
» On contaminated with mold surfaces: Remove unstable residues, apply KRAFT MOLD BLOCKER. After 24h and before priming remove the mold.
» Allow new plaster or concrete to surfaces to cure a minimum of 30 days prior to primer application.
» Before you start painting, dilute the primer by adding up to 5% by volume tap water and stir well.
» Appropriate application tools for this product are brush, roller and airless spray gun.
» Stir before reuse and during application.
» Apply one coat of KRAFT DUR AQUA WHITE for the best result. Then apply 2 coats of the proper top coat.
» Minimum recoat time is 12 hours.
» The surface drying time is 1-2 hours at 25 °C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Do not apply at temperatures below 10 ° C and above 35 ° C and above 65% relative humidity.
After Use Ιnstructions
» Close the bucket undiluted to maintain in good condition for future use. Store before and after use in a cool place and away from sunlight or frost conditions.
» Clean the tools thoroughly with water and soap.
» Store the product at temperatures between 5°C to 35°C.