INTERIORSPAINTSEnergy Save Interior - Kraft Paints

Energy efficient, photocatalytic paint for effective thermal protection and improved indoor air quality of walls and ceilings

Waterborne, high solids, premium quality, ultra-matt, light-weight coating for application on interior walls. It is based on a patented technology presenting a durable and efficient possibility for isothermal storage of the peak loads, which usually occur during the day and releasing these again with a time delay thus contributing to an improved indoor climate, more comfortable living conditions and better energy efficiency by using intelligent temperature management through unique thermal insulating ingredients. Moreover it reflects the heating energy from the walls back into the room increasing further the thermal comfort. Also due to its photocatalytic activity it converts noxious gases and odours into uncritical substances contributing to a better indoor air quality. It presents excellent adhesion and washability. Superior resistance to bacteria, fungi and algae is a further benefit with Energy Save Interior. It is suitable for uninsulated residences as well as hospitals, schools, offices, hotels etc.

» High latent heat retention
» 
Improves thermal comfort
» 
Optimum indoor climate throughout the year

Araiosi_01

Thinning
0%

Araiosi_01

Coverage
8-12m2/L

Araiosi_01

Tools
Brush, roller, spray-gun

Packaging

1 L, 3 L, 9 L

Shades

White



  • Instructions
  • STORAGE

Instructions

SURFACE PREPARATION AND APPLICATION
To ensure proper adhesion, the surface must be dry, clean and free of dust, oil, salt, rust, loose paint and residues, blistered paint etc. Remove all moss, fungi and algae by mechanical abrasion and wash with soapy water and allow the substrate to dry.
» All new surfaces such as fresh concrete, stucco, plaster must be cured about 30 days before the application of ENERGY SAVE INTERIOR.
» Use suitable KRAFT sealant to fill joints and gaps.
» Use suitable KRAFT repairing or puttying material to repair or patch damaged surfaces.
» On pre-painted surfaces: 3 coats of ENERGY SAVE INTERIOR.
» On new surfaces: Apply 1 coat KRAFT ECO DUR AQUA or KRAFT DUR AQUA WHITE or KRAFT HAFT or KRAFT ECO BLOCKER AQUA and 3 coats ENERGY SAVE INTERIOR.
» On surfaces with mould, moss, fungi, algae: Remove of loose residues, apply 1 coat KRAFT MOLD BLOCKER, cleaning, priming with KRAFT ECO DUR AQUA or KRAFT DUR AQUA WHITE or KRAFT ECO STAIN BLOCKER AQUA and 3 coats ENERGY SAVE INTERIOR.
» Fresh concrete, plaster, gypsum stucco: After 30 days at least apply 1 coat KRAFT ECO DUR AQUA or KRAFT DUR AQUA White and 3 coats ENERGY SAVE INTERIOR.

APPLICATION INSTRUCTIONS
» Tools: Roller, brush or airless or air-assisted spray gun.
» Cleaning: The tools and spillages may be cleaned immediately with soapy water.
» Thinning: If required, dilute with a maximum of 5% clean
» Dry to Touch: 1-2 hours at 25oC and 50% relative humidity (drying times are longer at lower temperatures and at higher relative humidity).
» Dry to Recoat: 4-6 hours under favorable drying conditions.
» Stir well with a flat paddle, before application and at regular intervals during application.
» Do not apply at temperatures below 10ºC or above 35ºC and at humidity levels above 65%.

STORAGE

» Store in dry conditions at temperatures between 5°C and 35°C.
» Keep containers tightly closed when not in use.

NEWSLETTER

Μάθετε πρώτοι όλα τα νέα.