Water borne white acrylic plasterboard primer for internal use. It is suitable to be applied on plasterboards but also on walls made of cement, plaster, etc. Provides an exceptional adhesion, opacity and a uniform appearance of the topcoat contributing to its higher spreading rate. It is recoated with all waterborne emulsion wall paints.
» Fills and covers the surface imperfections
» Contributes to the topcoat’s opacity
» Recoated with all waterborne emulsion wall paints
Roller, brush, airless, spray-gun
Dry to touch
½ - 1 hours
3 L, 9 L
SURFACE PREPARATION AND APPLICATION
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. Wet sanding is recommended for the surface preparation.
» On new surfaces: apply one coat of KRAFT GO! PLASTERBOARD PRIMER.
» On surfaces that need filling: use KRAFT SPACHTEL or KRAFT PUTTY or the suitable repairing material of KRAFT.
» Allow new plaster or concrete to surfaces to cure a minimum of 30 days prior to primer application.
» Before you start painting, dilute the primer 8-12% by volume with tap water and stir well.
» Appropriate application tools for this product are brush, roller and airless spray gun.
» Apply one coat of KRAFT GO! PLASTERBOARD PRIMER for the best result. Then apply 2 coats of the proper topcoat.
» Minimum recoat time is 3-4 hours.
» The surface drying time is ½-1 hours at 25°C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.
AFTER USE INSTRUCTIONS
» Close the bucket undiluted to maintain in good condition for future use. Store before and after use in a cool place and away from sunlight or frost conditions.
» Clean the tools thoroughly with water and soap.
» Store the product at temperatures between 5°C to 35°C.