EXTERIORSPAINTSGo! Exterior - Kraft Paints

Economy acrylic paint for exterior use

Economical acrylic paint for exterior walls. It is suitable for frequent wall repainting. It covers effectively the wall imperfections, providing a uniform matt and water vapour permeable finish. It is easy to apply, it spreads evenly.|

» Very Good Opacity
» 
Easy to apply
» Suitable for frequent repainting

Araiosi_01

Thinning
0-10%

Araiosi_01

Coverage
10-12m²/L

Araiosi_01

Tools
Brush or roller

Araiosi_01

Dry to touch
1-2 hours

Packaging (White)

0.75 L, 3 L, 9 L

Packaging (Base P)

1L, 3L, 9 L



  • Instructions
  • STORAGE

Instructions

SURFACE PREPARATION AND APPLICATION
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. Wet sanding is recommended for the surface preparation.
» On new surfaces: Before applying the topcoat, apply one coat of a primer such as KRAFT ECO DUR AQUA or KRAFT DUR AQUA WHITE or KRAFT HAFT or Kraft DUR.
» On surfaces that need filling: use KRAFT SPACHTEL or KRAFT PUTTY or the suitable repairing material of KRAFT.
» Allow new plaster or concrete to surfaces to cure a minimum of 30 days prior to paint application.

APPLICATION INSTRUCTIONS
» Avoid applying in case of expected rain in the next 7 days.
» Before you start painting, dilute the paint by adding up to 10% by volume tap water and stir well.
» Appropriate application tools for this product are brush or roller.
» The product be shall be tinted with KRAFT INSPIRED COLOR tinting system to thousands shades. To ensure product quality it is required to tint the corresponding base selected from the tinting system of KRAFT.
» For shade and finish consistency, it is advisable to use containers of the same batch number. In case of different batch number it is recommended that they be mixed in a large container.
» Tonal deviation may occur in some shades.
» KRAFT GO! EXTERIOR White is tintable with KRAFT MASTER BASICS for plenty of light shades.
» Apply two coats of KRAFT GO! EXTERIOR for the best result.
» Minimum recoat time: 3-4 hours.
» Surface drying time: 1-2 hours at 25°C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Avoid patching after finishing the painting. The difference of the substrate absorbance and application method might cause color or gloss deviations. If it is necessary to repair apply the paint to the whole surface.
» Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.

AFTER USE INSTRUCTIONS
» Clean the tools thoroughly with water and soap.
» Close the bucket to maintain in good condition for future use. Store before and after use in a cool place and away from sunlight or frost conditions.

STORAGE

» Store the product at temperatures between 5°C to 35°C.

NEWSLETTER

Μάθετε πρώτοι όλα τα νέα.