White water-paint for interior walls and ceilings
White water-paint with high whiteness and vapour permeability for interior walls and ceilings. Suitable for frequent repainting. It provides a uniform mat finish.
» High whiteness
» High vapour permeability
» Suitable for frequent recoating
Dry to touch
3 L, 9 L
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. Wet sanding is recommended for surface preparation.
» On new surfaces: Before applying the topcoat, apply one coat of a water-based primer such as KRAFT ECO DUR AQUA or KRAFT DUR AQUA WHITE or KRAFT HAFT or KRAFT GO! plasterboard primer.
» On surfaces that need repairing: Use KRAFT SPACHTEL or KRAFT PUTTY or the suitable repairing material of KRAFT.
» Before you start painting, dilute the paint 8-12% by volume with tap water and stir well.
» Appropriate application tools for this product are brush and roller.
» Apply two coats of Kraft Go! HYDROCHROMA for the best result.
» Surface drying time: 1-2 hours at 25°C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Minimum recoat time: 4-6 hours.|
» Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.
» Go! HYDROCHROMA can be mixed with KRAFT MASTER BASICS for plenty of light shades. Apply two coats of KRAFT GO! HYDROCHROMA for the best result.
» Avoid patching after finishing the painting. The diﬀerence of the substrate absorbance and application method might cause colour or gloss deviations. If it is necessary to repair apply the paint to the whole surface.
AFTER USE INSTRUCTIONS
» The painted with KRAFT GO! HYDROCHROMA surface is not washable.
» Clean the tools thoroughly with water and soap.
» Close the bucket to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
» Store the product before and after opening at temperatures between 5°C to 35°C.