INTERIORSPAINTSGO! Interior - Kraft Paints

Economy emulsion paint for interior walls and ceilings

Economical emulsion paint for interior walls and ceilings. It is suitable for frequent wall repainting. It covers effectively the wall imperfections, providing a uniform matt finish. It is easy to apply, it spreads evenly.

» Very Good Opacity
» 
Covers effectively wall imperfections
» 
Suitable for frequent repainting

Araiosi_01

Thinning
0-10%

Araiosi_01

Coverage
10-12m2/L

Araiosi_01

Tools
Brush, roller

Araiosi_01

Dry to touch
1-2 hours

Packaging (White)

0,75 L, 3L, 9L

Packaging (Base P)

1 L, 3 L, 9 L



  • Instructions
  • STORAGE

Instructions

SURFACE PREPARATION AND APPLICATION
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. Wet sanding is recommended for surface preparation.
» On new surfaces: Before applying the topcoat, apply one coat of a water-based primer such as KRAFT ECO DUR AQUA or KRAFT DUR AQUA WHITE or KRAFT HAFT or KRAFT GO! PLASTERBOARD PRIMER.
» On surfaces that need repairing: use KRAFT SPACHTEL or KRAFT PUTTY or the suitable repairing material of KRAFT.

APPLICATION INSTRUCTIONS
» 
Before you start painting, dilute the paint by up to 10% by volume with tap water and stir well.
» Appropriate application tools for this product are brush and roller.
» The product shall be tinted with KRAFT INSPIRED COLOR tinting system to thousands shades. To ensure product quality it is required to tint the corresponding base select-ed from the tinting system of KRAFT.
» For shade and finish consistency, it is advisable to use containers of the same batch number. In case of different batch number it is recommended that they be mixed in a large container.
» Tonal deviation may occur in some shades.
» Go! INTERIOR White can be mixed with KRAFT MASTER BASICS for plenty of light shades.
» Apply two coats of KRAFT GO! INTERIOR for the best result.
» Minimum recoat time: 3-4 hours.
» Surface drying time: 1-2 hours at 25°C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Avoid patching after finishing the painting. The difference of the substrate absorbance and application method might cause color or gloss deviations. If it is necessary to repair apply the paint to the whole surface.
» Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.

AFTER USE INSTRUCTIONS
» 
Clean the tools thoroughly with water and soap.
» Close the bucket to maintain in good condition for future use. Store before and after use in a cool place and away from sunlight or frost conditions.

STORAGE

» Store the product at temperatures between 5°C to 35°C.

NEWSLETTER

Μάθετε πρώτοι όλα τα νέα.