Transparent waterbased acrylic primer

Water borne transparent acrylic wall primer for internal and external use. It is applied to new suitably prepared alkaline surfaces such as plaster walls, cement boards or painted with a stable emulsion or acrylic paint.
It is almost odorless, reduces surface absorbance, enhances adhesion between surface and final product as well as increases the spreading rate and durability of the final coating.

» Reduces the absorbance of the substrate
» 
Enhances the adhesion
» 
Reduces the topcoat’s consumption

Araiosi_01

Thinning
300-400%

Araiosi_01

Consumption
30-40m2/L

Araiosi_01

Tools
brush, roller or air-gun

Araiosi_01

Dry to touch
1-3 hours

Packaging

0.75 L, 10 L, 3 L

Shades

White



  • Instructions
  • STORAGE

Instructions

SURFACE PREPARATION
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc.
On new or already applied surfaces: apply one coat of KRAFT HAFT
On surfaces that need filling: use KRAFT SPACHTEL or KRAFT PUTTY or other suitable repairing material of KRAFT.
On contaminated with mold surfaces: Remove unstable residues, apply KRAFT MOLD BLOCKER. After 24h and before priming remove the mold
Allow new plaster or concrete to surfaces to cure a minimum of 30 days prior to primer application.

APPLICATION INSTRUCTIONS
» Before you start painting, dilute the primer by adding 300-400% by volume tap water and stir well.
» Appropriate application tools for this product are brush, roller and spray gun.
» Stir before reuse and during application.
» Apply one coat of KRAFT HAFT for the best result. Then apply 2 coats of the proper top coat.
» Minimum recoat time is 4-6 hours.
» The surface drying time is 1-3 hours at 25 °C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Do not apply at temperatures below 10 ° C and above 35 ° C and above 65% relative humidity.

AFTER USE INSTRUCTIONS
» Close the bucket undiluted to maintain in good condition for future use. Store before and after use in a cool place and away from sunlight or frost conditions.
» Clean the tools thoroughly with water and soap.

STORAGE

» Store the product at temperatures between 5 °C to 35 °C.

NEWSLETTER

Μάθετε πρώτοι όλα τα νέα.