High-quality emulsion paint
High-quality emulsion paint for indoor walls, plasterboards, etc. Certified according to the strictest specifications of the voluntary scheme Indoor Air Comfort® contributing to the Indoor Air Quality and the healthy indoor atmosphere. It provides certified antimicrobial protection on its dry film preventing its degradation by fungi and microbes in humid environment. It is easily washed, withstanding frequent washing with mild detergents. Because of its very low gloss, covers effectively the wall imperfections, providing a uniform matt finish. Its bright white and the thousands of valid shades, last in time and yellowing, enhancing aesthetic throughout. It is easily applied, spreads evenly and is almost odorless.
» High Coverage
» High Washability
» Wonderful mat finish
brush, roller, airless spray-gun
Dry to touch
0.375 L, 0.750 L, 3 L, 10 L
1 L, 3 L, 10 L
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. Wet sanding is recommended for the surface preparation.
» On new surfaces: Before applying the topcoat, apply one coat of a water-based primer such as KRAFT ECO DUR AQUA or KRAFT DUR AQUA WHITE or KRAFT HAFT.
» On surfaces that need repairing: Use KRAFT SPACHTEL or KRAFT PUTTY or the suitable repairing material of KRAFT.
» On surfaces with stain problems: Use first the insulating undercoat KRAFT ECO STAIN BLOCKER AQUA.
» Before you start painting, dilute the paint by adding 5-15% by volume tap water and stir well.
» Appropriate application tools for this product are brush, roller, and airless spray gun.
» The product shall be tinted with KRAFT INSPIRED COLOR tinting system to thousands shades. To ensure product quality required painted the corresponding base selected from the tinting system of KRAFT.
» For shade and finish consistency, it is advisable to use containers of the same batch number. In case of different batch number, it is recommended that they be mixed in a large container. KRAFT MASTER White can be mixed with KRAFT MASTER BASICS for plenty of light shades.
» Apply two coats of KRAFT MASTER for the best result.
» For ceilings, it is prospectively recommended the use of 2 layers of the photocatalytic paint KRAFT MASTER CLEAN AIR.
» Minimum recoating time is 4 – 6 hours.
» The surface drying time is 1 – 2 hours at 25 °C and 50% relative humidity (drying times are longer in wet/cold conditions).
» In case of low opacity dark shades or with the appropriate labeling on the KRAFT INSPIRED COLLECTION color fan deck it is recommended to apply KRAFT ECO STAIN BLOCKER AQUA tinted in the same color family.
» Avoid patching after finishing the painting. The difference of the substrate absorbance and application method might cause color or gloss deviations. If it is necessary to repair apply the paint to the whole surface.
» Do not apply at temperatures below 5 °C and above 35 °C and above 65% relative humidity.
AFTER USE INSTRUCTIONS
» Clean the tools thoroughly with water and detergent.
» Close the bucket to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
» Allow at least 15 days before cleaning and washing newly painted surfaces. Dark shades are less resistant to frequent washing.
» You can wash the painted surfaces gently with a soft sponge and water and in cases of bad stains with a mild detergent.
» Available in White in 0.375L, 0.750L, 3L & 10L. Bases P, T, D, A in containers of 1L, 3L, and 10L. Photocatalytic properties are valid for white and selected pale shades.
» Store the product before and after opening at temperatures between 5°C to 35°C.