INTERIORSPAINTSMaster Hydrocontrol - KRAFT Paints

Superior quality emulsion paint for kitchen & bathroom

Superior quality emulsion paint for walls, plasterboards etc. Certified according to the strictest specifications of the voluntary scheme Indoor Air Comfort® contributing to the indoor air quality and the healthy indoor atmosphere. Thanks to its isothermal property and the microscopic glass beads, it tends to balance the temperature of the walls and prevents the condensation of accumulated water vapours due to the temperature difference. At the same time it resists to the mold growth on its surface, being evaluated by the internationally recognized and accredited IMSL institute.

Because of its properties it is suitable for interiors with intense humidity, poor ventilation and lack of natural light, such as kitchens, bathrooms, WCs basements etc. It is easily cleaned and resistant to washing with mild detergents. Due to its very low gloss, it covers effectively the wall’s imperfections and gives an ultra-mat finish.

» Extra excellent ultra-mat finish
» Resistant to mold growth

» High washability






brush, roller, airless, spray-gun


Dry to touch
1-2 hours

Packaging (White)

0.750 L, 3 L, 10 L

Packaging (Base P)

1 L, 3 L, 10 L

  • Instructions


To ensure good adhesion, the surface must be dry, clean and free of dust, grease residues, blistered paint etc. Wet sanding is recommended. Avoid dust generation and exposure to it.
» On new surfaces: Before applying the topcoat, apply one coat of a waterbased primer such as KRAFT ECO DUR AQUA, KRAFT DUR AQUA WHITE or KRAFT HAFT.
» On surfaces that need repairing: Use KRAFT SPACHTEL or KRAFT PUTTY or the suitable repairing material of KRAFT.
» On surfaces with stains and mold problems: Use first the insulating undercoat KRAFT ECO STAIN BLOCKER AQUA. In case of mold before priming remove the mold using KRAFT MOLD BLOCKER.

» Before you start painting, dilute the paint by adding 5-10% by volume tap water and stir well.
» Appropriate application tools for this product are brush, roller and airless spray gun.
» The product shall be tinted with KRAFT INSPIRED COLOR tinting system to thousands shades.
» To ensure product quality it is required to tint the corresponding base selected from the tinting system of KRAFT.
» For shade and finish consistency, it is advisable to use containers of the same batch number.
» In case of different batch number it is recommended that they be mixed in a large container.
» KRAFT MASTER HYDROCONTROL White can be mixed with KRAFT MASTER BASICS for plenty of light shades.
» Apply 2–3 coats of KRAFT MASTER HYDROCONTROL for the best result.
» Minimum recoat time: 4-6 hours.
» Surface drying time: 1-2 hours at 25°C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Avoid patching after finishing the painting. The difference of the substrate absorbance and application method might cause color or gloss deviations. If it is necessary to repair apply the paint to the whole surface.
» Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.

» Clean the tools thoroughly with water and detergent.
» Close the bucket well to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
» Allow at least 15 days before cleaning and washing newly painted surfaces. Dark shades are less resistant to frequent washing.
» You can wash the painted surfaces gently with a soft sponge and water and in case of bad stains with a mild detergent.


Read label before use. For further information please consult the
Material Safety Data sheet.

Poison Centre Telephone: +30 210 7793 777


» Store the product at temperatures between 5°C to 35°C.


Μάθετε πρώτοι όλα τα νέα.