Anticorrosive paint for metal
High-quality solvent-borne enamel paint for metals. It can be applied directly to rusty surfaces without prior use of rust primer. Its special composition ensures strong protection against rust on any new or old metal such as rail, garage door, preventing rust appearance. It creates a durable surface with high resistance to adverse weather conditions and atmospheric pollution. It dries quickly and evenly. It features excellent leveling and easy brushing, providing a glossy and durable surface with a perfect finish.
» Excellent anticorrosive protection
» High durability
» Superior finish
brush, roller, or airless spray gun
Dry to touch
0.75 L, 2.5 L
15 Shades, Glossy, Smooth
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. In case of rusty surfaces, sand and remove residues.
» Avoid applying in case of expected rain in the next 5 days.
» Apply it outdoor or in a well-ventilated area.
» Before start painting, dilute the paint by adding up to 5% by volume with KRAFT BRUSH SOLVENT or with KRAFT NITRO 1100 for spray gun application and stir well. For faster drying and hardness.
» Appropriate application tools for this product are brush roller or spray-gun.
» For shade and finish consistency, it is advisable to use containers of the same batch number. In case of a diﬀerent batch number, it is recommended that they are mixed in a large container.
» Apply 2 – 3 coats of KRAFT METAL 3in1 CLASSIC for the best result. The dry film thickness shall be more than 90μm.
» Pay special attention to the full coverage of diﬃcult points such as recesses to avoid possible moisture penetration.
» Minimum recoat time is 24 hours.
» The surface drying time is 2 – 3 hours at 25 °C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Do not apply at temperatures below 5 ° C and above 35 ° C and above 65% relative humidity.
AFTER USE INSTRUCTIONS
» Clean the tools thoroughly with KRAFT BRUSH THINNER, water, and soap.
» Close the bucket well to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
» The painted surface must be used after 48h and the through drying of the paint.
» The painted surface is washable after at least 30 days from the application.
» Store the product before and after opening at temperatures between 5 °C to 35 °C.