METAL PROTECTIONSUBSTRATESSUBSTRATESMetal Primer - Kraft Paints

Alkyd undercoat for metals

High quality solvent borne alkyd undercoat for indoor or outdoor use. It is suitable for recoating metallic wooden or mineral surfaces after the primer and before the topcoat. It contributes to the anticorrosive protection, it dries fast and it is easily sanded.

» Enhances the adhesion
» Contributes to the anticorrosive protection
» Fills the surface imperfections

Araiosi_01

Thining
5-10%

Araiosi_01

Coverage
8-10 m²/L

Araiosi_01

Application
Brush, roller or spray-gun

Araiosi_01

Dry to touch
2-3 hours

Packaging

0.75 L, 2.5 L

Shades

White



  • Instructions
  • Storage

Instructions

SURFACE PREPARATION
» To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. In case of rusty surfaces, sand and remove residues.
Wet sanding is recommended for the surface preparation.
» On new metallic surfaces: before the top coat, apply 1 coat of KRAFT RUST BLOCKER, then 1-2 coats of KRAFT METAL PRIMER.
» On wooden surfaces: before the top coat, apply 1 coat of KRAFT WOOD CARE for protection against insects and fungi, then 1-2 coats of KRAFT METAL PRIMER.
» On mineral surfaces: Sand and apply 1-2 coats of KRAFT METAL PRIMER. Then apply the topcoat.
» Allow new plaster or concrete to surfaces to cure a minimum of 30 days prior to paint application.

APPLICATION INSTRUCTIONS
» It is ready to use. If needed before start painting, dilute the paint by adding 5–10% by volume KRAFT BRUSH THINNER or up to 10% by volume KRAFT NITRO 1100 for spray gun application and stir well. For airless application dilute up to 5% by volume with KRAFT NITRO 1100.
» Appropriate application tools for this product are brush roller or spray-gun.
» Apply 1-2 coats of KRAFT METAL PRIMER for the best result.
Then apply 2 coats of the proper topcoat of KRAFT.
» Apply it outdoor or in a well-ventilated area.
» Minimum recoat time: 24 hours.
» The surface drying time is 2-3 hours at 25°C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.

AFTER USE INSTRUCTIONS
» Clean the tools thoroughly with KRAFT BRUSH THINNER, water and soap.
» Close the bucket well to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.

Storage

» Store the product before and after opening at temperatures between 5°C to 35°C.

NEWSLETTER

Μάθετε πρώτοι όλα τα νέα.