Anti-mold preservative solution
Water-based preservative for building materials used for the maintenance of non-wood building surfaces such as painted or unpainted walls, cement, plaster, joints, tiles, stones etc. by controlling their attack by microbes such as fungus bacteria, algae.
» Strong action against fungi, bacteria and algae
» Approved by the Greek Ministry of Rural Development & Food
Consumption
9 - 10m²/L
Tools
Spray
Dry time
24 hours
| Packaging | 500ml |
|---|---|
| Shades | Transparent |
- INSTRUCTIONS
- STORAGE
INSTRUCTIONS
SURFACE PREPARATION
»To remove bacteria and algae mildew, spray KRAFT MOLD BLOCKER on the surface and let it work for about 1 day.
» Then rub the surface with a sponge or hard brush and rinse the surface with water.
» Then the surface applied to the KRAFT MOLD BLOCKER is safe for use by humans or animals. To ensure long-lasting protection of the surface in question, apply the material every 4 months.
» If necessary, after the maintenance, apply 2 coats of KRAFT MASTER HYDROCONTROL above the surface.
APPLICATION INSTRUCTIONS
» Application Tools: Spray
» Dilution: Ready to use
» Drying time: 20-30 min.
» Time of action: 24h
» It shall not be added in primers and topcoats.
» Applicable throughout the year
STORAGE
» Protect from direct sunlight and temperatures higher than 45ºC or lower than 5ºC. Keep it tightly closed.
