PUTTIESPutty - KRAFT Paints

Elastomeric putty for cracks and joints

Ready to use water-based, elastomeric acrylic putty for repairing and waterproofing of interior and exterior surfaces. It is used on concrete, bricks, wood, plasters and plasterboards and it is suitable for crack bridging and filling joints. It contains special microspheres presenting minimum shrinkage upon drying. It has strong adhesion, it is applied and sanded easily and presents excellent resistance to humidity, frost and high mechanical stresses.

» Highly flexible
» 
Doesn’t crack
» 
Strong adhersion

Araiosi_01

Thinning
0%

Araiosi_01

Coverage
2-3m2/kg

Araiosi_01

Tools
Putty knife, trowel or leveler

Araiosi_01

Dry to touch
3-4 hours

Packaging

1 kg, 15 kg, 4 kg, 500 g

Shades

Grey



  • Instructions
  • STORAGE

Instructions

SURFACE PREPARATION AND APPLICATION
To ensure proper adhesion and adequate substrate penetration, the surface must be dry, clean and free of dust, oil, salt, rust, loose paint and residues, blistered paint etc. Remove all moss, fungi and algae by mechanical abrasion and wash with soapy water and allow the substrate to dry.
» On porous substrates: apply one coat of KRAFT ECO DUR AQUA diluted with 80% water and allow to dry.
» Apply the material by putty knife in to fill cracks and dents up to 1cm. for larger cracks use suitable sealant of KRAFT, It can be sanded after thoroughly drying with a suitable abrasive sandpaper. It is recoated with any emulsion, acrylic or enamel paints of KRAFT after proper preparation.

APPLICATION INSTRUCTIONS
» Tools: Putty knife, trowel or leveler.
» Cleaning: The tools and spillages may be cleaned immediately with soapy water.
» Thinning: No thinning is required
» Dry to Touch: 3-4 hours at 25ºC and 50% relative humidity (drying times are longer at lower temperatures and at higher relative humidity).
» Dry to Recoat: 7-8 favorable drying conditions.
» Stir well with a flat paddle, before application and at regular intervals during application.
» Do not apply at temperatures below 5ºC or above 35ºC and humidity levels above 65%.
» Avoid inhalation of dust by using suitable respiratory protective equipment during sanding.
» Do not apply under direct sunlight or if rain is imminent.

STORAGE

» Store containers at 5ºC to 35ºC. Keep containers tightly closed when not in use.

NEWSLETTER

Μάθετε πρώτοι όλα τα νέα.