Textured coating for interior and exterior use
Water-based textured coating based on acrylic dispersion for interior and exterior use. It is suitable for application on walls, plaster, concrete, bricks, wood, and gypsum boards. It oﬀers very good stain, weather and water resistance. Provides an attractive textured semi-gloss finish that will hide and cover minor imperfections of the substrate.
» High build
» Eﬀective coverage
» Excellent textured finish
brush, relief roller
Dry to touch
15 kg, 5 kg
SURFACE PREPARATION AND APPLICATION
To ensure proper adhesion and adequate substrate penetration, the surface must be dry, clean and free of dust, oil, salt, rust, loose paint and residues, blistered paint etc. Remove all moss, fungi, and algae by mechanical abrasion and wash with soapy water and allow the substrate to dry.
It is recommended that fresh concrete, stucco, plaster and gypsum surfaces are allowed to dry for at least 3 weeks before the application of KRAFT RELIEF.
Use KRAFT SPACHTEL or KRAFT PUTTY or other suitable repairing material of KRAFT to fill gaps, cracks and other damaged surfaces.
On bare and porous substrates prime with KRAFT ECO DUR AQUA or KRAFT DUR.
» Tools: Brush, Relief roller (spongy)
» Cleaning: Immediately after the application, the tools must be cleaned with warm water and soap or a detergent solution. Remove as much material as possible from tools before cleaning.
» Thinning: No thinning is required.|
» Dry to touch: 1-2 hours
» Dry to recoat: 24 hours
» Stir well with a flat paddle, before application, and at regular intervals during application.
» Do not apply at temperatures below 10ºC or above 35ºC or at humidity levels above 65%.
» Store in dry conditions at temperatures between 5°C and 35°C. Keep containers tightly closed when not in use.