Highly eﬃcient paint stripper without dichloromethane for easy removal of old solvent-borne or waterborne paint or varnish films from every substrate (walls, floors, wood, metal etc.). Due to its special formula, it is eﬀective even for removing 2K (PU or epoxy) or high build paints.
» High eﬃciency
» Easy to use
» Without dichloromethane
brush, putty knife, sharpener or spatula
Dry to touch
0.375 L, 0.75 L
- APPLICATION INSTRUCTIONS
» Product ready to use.
» Apply it outdoor or in a well-ventilated area.
» Wear protective gloves, clothing, and eye/face protection equipment.|
» Appropriate application tools for this product are brush, putty knife, sharpener or spatula.
» Apply one thick coat of KRAFT REMOVER with a brush on the surface.
» Let it act for 5–10min for 1K paints or 15–30min for 2K paints.
» In case the paint is too old or of high build film, apply a second coat of KRAFT REMOVER.
» When the paint is swollen remove it with a putty knife, sharpener or spatula.
» Clean the surface with water under pressure or with KRAFT BRUSH THINNER.
» Sand the surface and remove any residues.
» Do not apply at temperatures below 5°C and above 35°C.
» Clean the tools thoroughly with water and soap.
» Close the bucket well to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
» Store the product before and after opening at temperatures between 5°C to 35°C.