SPECIAL PRODUCTSSTONE VARNISHESStone Care Aqua - KRAFT Paints

Acrylic waterborne stone varnish

It is a high quality waterborne acrylic varnish for stones and porous mineral substrates based on nanotechnology for exterior and interior use. It protects and decorates porous substrates such as stones, bricks, cementitious substrates etc. offering a “wet-look” effect on the surface. Due to its special formula, penetrates deeply into the substrate, providing waterproof and strong adhesion, hardness, and protection from the atmospheric pollutants. It protects its film from mold growth and corrosion caused by the weather conditions. Additionally, it contains UV filters, offering high resistance to sunlight. Its hard end elastic surface makes it suitable for stone floors

» High impregnating properties
» 
Protects the stone from corrosion
» Refreshes the stone appearance

Araiosi_01

Thinning
0%

Araiosi_01

Spreading rate
8-10m2/L

Araiosi_01

Tools
brush, roller or spray-gun

Araiosi_01

Dry to touch
1 hour

Packaging

0.75 L, 2.5 L

Shades

Colorless



  • Instructions
  • STORAGE

Instructions

SURFACE PREPARATION
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint or varnish etc.
» On new stone surfaces: Before applying the varnish, wash the surface with water and dry well.
» On painted surfaces with mold/algae: Remove all residues, and the surface, apply KRAFT MOLD BLOCKER and after 24h remove the mold/algae.
» On stone floors: Remove all residues, wash the surface with water and dry well.

APPLICATION INSTRUCTIONS
» The product is ready to use.
» Check the surface moisture before painting. The surface must dry properly.
» Tools: Brush, roller or spray gun.
» Stir well before use.
» Apply 1-2 coats of KRAFT STONE CARE AQUA for vertical surfaces and 2 coats for floors.
» Minimum recoat time: 5 hours.
» Surface drying time: 1 hour at 25ºC and 50% relative humidity (drying times are longer in wet/cold conditions).
» Avoid application at temperatures below 10ºC or greater than 35ºC and relative humidity greater than 50%.

AFTER USE INSTRUCTIONS
» Close the bucket well to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
» Clean the tools thoroughly with water and soap.

STORAGE

» Store the product before and after opening at temperatures between 5ºC to 35ºC.

NEWSLETTER

Μάθετε πρώτοι όλα τα νέα.