High-quality acrylic paint for indoor use
High quality ultra-mat acrylic paint for indoor use. It is used for the protection of new or painted surfaces such as walls, ceilings, plaster-board, plaster, etc. It has excellent resistance to soiling and easy cleaning, keeping the surface clean. Because of its special composition, it behaves perfectly against moisture since it is not aﬀected by alkalis and because of the specific biocides it contains does not allow the growth of microbes and mold on its surface. It is easy to apply; it has a great performance and excellent spread, oﬀering a perfect and uniform finish.
» High performance
» Antimicrobial properties
» Dirt pick-up resistance
Brush, roller, spray-gun
Dry to touch
0.750 L, 3 L, 9 L
|Packaging (Bases P, D, A)||
1 L, 3 L, 9 L
To ensure good adhesion, the surface must be dry, clean and free of dust, grease, residues, blistered paint etc. Wet sanding is recommended for surface preparation.
» On new surfaces: before applying the topcoat, apply one coat of a water-based primer such as Kraft ECO DUR AQUA or KRAFT DUR AQUA WHITE or KRAFT HAFT.
» On surfaces that need repairing: use KRAFT SPACHTEL or KRAFT PUTTY or the suitable repairing material of KRAFT.
» On surfaces with stains and mold problems: clean the surface with KRAFT MOLD BLOCKER and then use the insulating undercoat Kraft ECO STAIN BLOCKER AQUA.
» Before you start painting, dilute the paint by adding up to 10% by volume tap water and stir well.
» Appropriate application tools for this product are brush, roller and airless spray gun.
» The product shall be tinted with KRAFT INSPIRED COLOR tinting system to thousands shades. To ensure product quality required painted the corresponding base selected from the tinting system of KRAFT.
» For shade and finish consistency, it is advisable to use containers of the same batch number.
» In case of diﬀerent batch number it is recommended that they be mixed in a large container.
» KRAFT SUPERIOR White can be mixed with KRAFT MASTER BASICS for plenty of light shades.
» Apply 2 coats of KRAFT SUPERIOR for the best result. Minimum recoating time is 10-12 hours.
|» The surface drying time is 1-2 hours at 25 °C and 50% relative humidity (drying times are longer in wet/cold conditions).
» Avoid patching after finishing the painting. The diﬀerence of the substrate absorbance and application method might cause color or gloss deviations. If it is necessary to repair apply the paint to the whole surface.
» Do not apply at temperatures below 10°C and above 35°C and above 65% relative humidity.
AFTER USE INSTRUCTIONS
» Clean the tools thoroughly with water and detergent.
» Close the bucket to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
» Allow at least 15 days before cleaning and washing newly painted surfaces. Dark shades are less resistant to frequent washing.
» You can wash the painted surfaces gently with a soft sponge and water and in cases of bad stains with a mild detergent.
» Store the product at temperatures between 5 °C to 35 °C.