Decorative wood varnish
It is a high-quality solvent borne polyurethane alkyd decorative varnish. It protects and decorates the wood. Suitable for exterior and interior wood surfaces such as doors, windows, frames, pergolas, fences. It presents an exceptional durability, dirt pick-up resistance and finish. It has excellent application and leveling properties creating a high-build dry film. The elasticity enables it to support dimensional variations without cracking or flaking.
» Strong durability
» Excellent finish
» High elasticity and hardness
Dry to touch
0.75 L, 2.5 L
Colorless, Glossy satin
SURFACE PREPARATION AND APPLICATION
The surface must be dry and free of dust, mold or resin. Sand with a suitable abrasive paper, along with the grain, and smooth well the surface.
» On new wooden surfaces: Remove greases or resins with KRAFT BRUSH THINNER, sanding parallel to the grain, removing the dust with a damp, lint-free cloth, apply 1 coat of KRAFT WOOD CARE wood preservative for protection against woodworm and fungi. In case you need a color eﬀect on wood, apply before the varnish, 1-2 coats of KRAFT WOOD CLASS.
» On painted surfaces: Check the surface stability. If it is acceptable to apply directly the varnish. If not, remove all old paint or varnish using KRAFT REMOVER and then clean the surface with KRAFT BRUSH THINNER or sand well until their removal with the appropriate sandpaper. After complete drying of the surface and removing all residues, repair all the defective points of the wood with suitable putty. Then apply the varnish.
» Before you start painting, dilute the paint by adding 5-10% by volume KRAFT BRUSH THINNER and stir well.
» Check the wood moisture before painting. It shall not exceed 10%.
» Do not apply on wooden surfaces which are in contact with the ground or water.
» The durability of the film is reduced when applied on horizontal surfaces that are pressed.
» Appropriate application tool for this product is brush.
» Apply 2 coats of KRAFT WOOD STYLE for the best result.
» Apply it outdoor or in a well-ventilated area.
» Minimum recoat time is approx. 24-48 hours. The recoat-ing time may vary depending on the weather conditions.
» The surface drying time is 2-3 hours at 25ºC and 50% relative humidity (drying times are longer in wet/cold conditions).
» Avoid application at temperatures below 10°C or greater than 35oC and relative humidity greater than 60%.
AFTER USE INSTRUCTIONS
» Close the bucket well to maintain in good condition for future use. Store before and after opening in a cool place and away from sunlight or frost conditions.
» Clean the tools thoroughly with KRAFT BRUSH THINNER, water, and soap.
» Avoid exposure of the painted surface in rain for 7 days after application.
» Allow at least 15 days before cleaning and washing newly painted surfaces.
» You can wash the painted surfaces gently with a soft sponge and water and in cases of bad stains with a mild detergent.
» Store the product before and after opening at temperatures 5ºC to 35ºC.